Oprax Medical Inc.

Progeny Linear IV Collimator System


 The Linear IV Collimator System is a microprocessor controlled, fully automatic unit designed to provide accurate collimation for overtable radiographic, fluoroscopic, and special procedure applications. The Linear IV provides automatic collimation even in applications where both the x-ray source and the receptor are movable and not limited to fixed SID's.

Features:
  • Self Diagnostic Capabilities.
  • Software Assisted Auto-Calibration
  • Continuous and Differential SID Capability
  • Separate Field Size Control/Calibration for Wall and Table Buckys
  • Last Field Size and Preset Field Size Recall
  • Stepper Motor Controlled Shutter Drive
  • Large LED display of field size (English or Metric)
  • Interface Available for Pausch Urology Table
  • Remote Control Available





    • Radiographic Ratings: 50Kvp Rated - Meets all requirements of 21 CFR Sub-Chapter J, and IEC 601-1-3.
    Ray Proofing: Less than 50mR/Hr at one meter from focus spot of x-ray tube measured at 150kV at 4mA leakage factor.
    Projection Lamp: Quick change, pre-aligned FDS pre-focused Quartz Haloagen lamp operates on 24 VAC. Lamp times out after approximately 25 seconds and may be reset at any time. Quick turn-off features allow for limited lamp use. Light output > 160 Lux at 40 inches.
    Tube Mounting: Mounted by 4 bolts at 90 with 3.625" bolt line center. Swivel mount allows 360 rotation with 90 detents.
    Dimensions: 8.10" x 6.99" x 12.03" - 205.7mm x 177.5mm x 305.6mm - Weight = 19.8 lbs. (9 kg).
    Color: Light grey (standard) Other colors available upon request.
    Electrical: 120/240 VAC, 50/60 Hz, 8 Amps.
    Certification: Certified to UL-2601-1 CAN/CSA-C22.2 No. 601-1-M-90, and IEC 601-2-32. Reference UL File No. E181750. CE Approved.



    Stock #
    Description
    Your Price
    70-75000
    Complete Linear IV Collimator with 40ft. of interconnect cable.
    $8,821.43