Oprax Medical Inc.

RAD-Check Plus X-Ray Test Instrument.


Fluke Biomedical, Inc. Key Features

  • Entrance skin exposure measurements (ESE)
  • Fluoroscopy exposure measurements
  • Exposure checks; radiographic (mR/mAs)
  • Beam quality; half value layer (HVL)
  • mAs reciprocity; mA station checks...plus many others, depending on the remote external chambers used
  • The American College of Radiology (ACR) recommends this type of product in their quality assurance program
  • Fast and easy-to-use. Battery operation and built-in detector eliminate setup time
  • Measures dose up to 2 R; dose rate up to 20 R/min
  • Energy response is ± 5% from 30 to 150 kVp for the RAD-CHECK PLUS internal chamber
  • Optional remote chambers for mammographic and cine imaging systems
  • Extremely compact...6 x 6.25 x 2.75 inch; weighs only 1.125 lb

    • Introduction
    Proven RAD-CHECK technology specifically designed to provide you with the ultimate in versatility and cost-effective operation. Accurate, lightweight, portable...this “industry standard” enables you to gain the critical edge in your QC program.

    Applications
    Battery operation and built-in detector virtually eliminate setup time. Just place the meter or external ion chamber on

    x-ray table; collimate, shoot, and read the result. Precision ion chamber and digital display ensure accuracy plus easy readability.

    Specifications

    Ranges 0.001 to 2 R, 0.01 to 20 R/min
    Internal chamber 30 cc volume, energy response ± 5% from 15 to 65 keV (30 to 150 kVp filtered). 20.5 cm² (5.1 cm Ø) effective measurement area. Center of chamber 1.03 cm below top of chamber
    Standard calibration At 75 kVp with 4 mm Al filtration at 22°C and one atmosphere
    Reproducibility Within 2% short-term over 100 mR to 2 R range (1 to 20 mGy)
    Electrometer drift 0.5 to 1 mR/min typical; 6 mR/min maximum (5 to 10 μGy; 60 μGy/min maximum)
    Maximum exposure rate Minimum 90% collection efficiency at 20 R/sec
    Automatic reset Resets display to zero; can also be reset manually
    Operating temperature 10 to 40°C
    Relative humidity 0 to 90%, non-condensing
    Display 3.50 x 0.50 inch LCD, low battery indicator
    Controls Auto or manual reset selector. Display zero reset button. Dose or dose rate output selector. Integral or remote ion chamber selector. On/off switch
    Power 9 V alkaline battery, > 100 hours operation (50 hours in manual reset mode)
    Dimensions 6 (w) x 6.25 (d) x 2.75 in (h) (15.25 x 15.9 x 7 cm)
    Weight 1.125 lb (0.51 kg)



    Stock #
    Description
    Your Price
    06-526
    Rad-Check Plus
    $1,818.40
    06-526-2200
    Rad-Check Plus, SI Unit
    $1,927.63
    89-525
    Carrying Case for Rad-Check
    Plus and Accessories
    $190.84


    Stock #
    Ion Chamber Type
    Volume
    Energy Response
    Cable
    Length
    Chamber
    Dimensions
    Your Price
    6000-528
    Radiographic
    30 cm3
    ± 7% from 30-150kVp
    (15-65keV)
    15ft (4.5m)
    4" x 4" x 1.4"
    (10.2cm x 10.2cm x 1.4cm)
    $1,316.67
    6000-529
    Mammographic
    3.3 cm3
    ± 5% from 0.2mm-5.0mm Al HVL
    16-90kVp
    15ft (4.5m)
    4cm Ø x 1.5cm Thick
    $1,210.44
    6000-100
    Computed Tomography (CT)
    3.2 cm3
    ± 5% from 1.0mm-10.0mm Al HVL
    3ft (0.9m)
    Sensitive area: 4" (10.0cm)
    chamber inside Ø: 0.25" (6.4mm)
    $2,251.63
    6000-530B
    Image Intensifier
    150 cm3
    ± 10% from 1.8mm-10.0mm Al HVL
    10ft (3.0m)
    6.26" x 8.00" x 0.63"
    (15.9cm x 20.6cm x 1.6cm)
    $1,818.40