Oprax Medical Inc.

Konica SRX-101A Table Top Film Processor.


Konica Medical Corporation!
KONICA - A New Dimension in Space & Time

The Konica SRX-101A processor produces high quality radiographs with easy operation and is the ideal choice for imaging sites, diagnostic centers and private practice offices. Perfect for reliable low volume applications, especially where space is at a premium. Depending on your space requirements, the control panel can be situated on either side of the processor.


A 17-inch wide film transport system provides faster film feed for larger radiographs, or two 8" x 10" films (or smaller) can be processed side-by-side. Up to 75 10" x 12" or 60 14" x 17" films can be processed per hour at the 90 second processing cycle. The fast film feed provides maximum throughput and peak operational efficiency. Once the light tight feedtray cover is closed the operator can leave the darkroom.

An innovative rack design and smooth plastic tanks make periodic cleaning remarkably easy and simplifies routine



Processing Capacity Per Hour
Film Size
90 Sec
120Sec
180Sec
10" x 12"
75
70
55
14" x 17"
60
55
40


maintenance. The SRX-101A incorporates a quiet operating infrared drying system for consistent drying of radiographs, and a light tight feed tray cover permits the operator to leave the darkroom during the film feed.

The compact design of the SRX-101A saves valuable space and incorporates an automatic standby with jog cycle for conserving water and energy. State-of-the-art technology precisely stabilizes developer and dryer temperatures. It also offers automatic replenishment. The SRX-101A plugs into any 110V outlet so no special wiring is needed. CPU provides state-of-the-art technology allowing easy trouble-shooting, diagnostic evaluation, and servicing.


With a push of a button, chemistry will automatically be supplied to the processor tanks for easier, cleaner replacement of chemicals. The SRX-101A is the first tabletop processor to offer variable speeds which can be set from within the processor. This allows you to choose the optimum cycle speed to match your processing needs. Konica's new 90 second cycle allows fast developing of all super rapid processable films.

90 Second Super Rapid Processing Cycle






120 Second Standard Processing Cycle
180 Second Extended Processing Cycle

Just as important as the medical imaging products you use are the support services you receive with them. Konica offers a variety of comprehensive programs that enable you to optimize efficiency, minimize rejects and waste, and maximize productivity within your radiology department or office.



Konica offers a one year warranty to the end user on all parts used in the SRX series. Please refer to Konica's Processor Warranty Certificate for complete details.





Specifications
Film Transport Method.
Continuous roller transport.
Film Types and Sizes.
Sheet film from 10cmX10cm
up to 35cmX43cm (14"X17")
Process Cycle Switching.
(Speed settings)
90sec, 120sec, 180sec
Internally set.
Processing Solution Volumes.
(Tank Capacities.)
Dev: 3.9 liters (1.0 gallons)
Fix: 1.8 liters (0.5 gallons)
Wash: 1.4 liters (0.4 gallons)
Chemical Recirculation System.
Continuous pumping of both
developer, and fixer solutions.
Temperature Control.
Developer solution temperature:
Controlled by constant heat exchange with the cold wash water, and an
electronically controlled heater in the developer solution in a "push-pull"
arrangement which helps maintain tight temperature control.
Film Dryer temperature:
Electronically regulated according to an internally adjusted
temperature setting.
Replenishment System.
Automatically supplies according to film size.
Wash Water Requirement.
Requires ordinary tap water in the 41º-86ºF (5º-30ºC)
Water pressure 49-686kPa (0.5~7kgf/cm²)(7~98psi)
Water Consumption.
0.8 liters/min.
(0.22 gallons/min)
Standby Functions.
(Power Saving Mode)
Internally Selectable by service engineer
10min / 30min / Continuous operation(disable)
Power Source.
AC 115/120VAC, Single Phase, 12Amps, 60Hz
Weight.
40kg (88lbs) with the tanks empty,
47kg (104lbs) with the tanks full
Heat Generation.
Approx. 3,135 kJ/h max.
Noise Level.
Approx. 55dB(A) max.
Operating Conditions.
59º~86ºF (15º~30ºC), 30%~75% RH (no condensation)
Included Accessories.
Measuring cup, Funnel, Installation parts kit, Replacement
parts kit, Replenisher tanks, and Operation manual.
Optional Equipment.
Light shield panel, Stand, Splash guard.


Stock #
Description
Your Price
SRX-101A
Konica Table Top Film Processor
$4,230.00