Oprax Medical Inc.

Standard Tilt & Rotate Mobile CR-Plate/Cassette Holder.
Techno-Aide!  
CR Plate & General Cassette Mobile Holder

Holder has an 18" square heavy STEEL base with protective mat....prevents tipping. Vertical range from bottom of cassette/plate: floor - 54". Arm slides vertically on 60" chromed steel post. Holder locks onto post with spring-loaded pin. Comes with E-Z-Roll swivel casters two are locking and Neutral Almond baked enamel finish.

Ships in two cartons: 1 @ 15 lbs, and 1 @ 55 lbs.

Stock #
Your Price
MCH-33B
$852.86




Extension Arm Tilt & Rotate Mobile Cassette Holder.
Techno-Aide!  
CR Plate & Cassette Mobile Holder with Extension Arm

Extends plate/cassette 11" - 24" from post. Fully articulating holder.18" square heavy STEEL base with protective mat prevents tipping. Vertical range from bottom of cassette/plate: floor - 54". Arm slides vertically on 60" chromed steel post. Holder locks onto post with spring-loaded pin. Comes with E-Z-Roll swivel casters two are locking and Neutral Almond baked enamel finish.

Ships in two cartons: 1 @ 15 lbs, and 1 @ 55 lbs.

Stock #
Description
Your Price
MCH-37B
Extension Arm Tilt & Rotate
Complete Mobile Unit Package Deal.
(Contains: Base, Post & Extension Arm Holder)
$900.00
MCA-B31B
Separate Component: Mobile Base (NO Post)
$304.29
MCA-P31B
Separate Component: Posi-Lock Post
$458.57
MCA-S33B
Separate Component: Standard Holder.
(Not for DR Plates, Use MCA-D40B Instead!)
$205.71
MCA-E37B
Separate Component: Extension Arm Holder
$252.86
MCA-T39B
Separate Component: Tall Cassette Holder
$240.00
MCA-D40B
Separate Component: DR-Plate Holder (for use
with MCH-40B)
$205.71






DR-Plate Holder with no tilt or rotate.


Stock #
Description
Your Price
MCH-40B
DR-Plate Holder(Non-tilt or rotate)
$852.86
Techno-Aide!  
Non-tilt or rotate. Holds up to 14" x 17" DR -plates. Lateral position only (non-articulating)18" square heavy STEEL base with protective mat prevents tipping. Vertical range from bottom of cassette/plate: floor - 54". Arm slides vertically on 60" chromed steel post. Holder locks onto post with spring-loaded pin. Comes with E-Z-Roll swivel casters two are locking and Neutral Almond baked enamel finish.






Tall Cassette Holder.
Techno-Aide!  
Holds up to 14" x 51" cassettes. Lateral position only (non-articulating) 18" square heavy STEEL base with protective mat prevents tipping. Comes with E-Z-Roll swivel casters two are locking and Neutral Almond baked enamel finish.


Stock #
Description
Your Price
MCH-39B
Tall Cassette Holder (Non-tilt or rotate)
$900.00






Soyee's Mobile Cassette Stand.


Soyee Products! Mobile Cassette Holder

Great for cross-table laterals, lateral decubitus views, and any situation where you need an extra pair of hands. The holder is fabricated of welded steel tubing with a durable, easily cleaned, cream-colored, powder-coat finish. Casters (3") provide easy mobility and are lockable. Vertical height adjustment of 29"-47" (737-1194mm) from the floor to center of the cassette. The holder accommodates cassettes from 8 x 10" through 14 x 17" with or without a grid. A spring loaded clamp firmly fixes the cassette in place yet allows easy removal of the cassette/film for processing. Horizontal and vertical movement (7-15" and 29-47" respectively) is fixed via positive acting screw-type locks. The cassette may also be rotated to either side of the vertical axis by 90 degrees to provide additional positioning versatility. The unit is counterweighted to offset the weight of the cassette on the extended horizontal arm.

Weight - 53 lbs.

Stock #
Your Price
SY-CSH
$678.57




Table-Top, Cross-Table Lateral Cassette Holder.
Techno-Aide!  
Improved Wider Channels are adjustable from Base to 24".

  • Eliminates hand held plate/cassette hazards.
  • Enhances Technologist's Safety.
  • Securely holds plate/cassette in a stable, upright position.

  • Both 6" wide channels adjust to fit cassette.
  • Holds up to 14" x 17" (35 x 43cm) cassettes.
  • Accepts Grid Cassettes and CR plates. (Channel is 1 ¼"D).
  • Base plate slides under patient or pad.
  • Upper channel includes a rotating R & L marker.
  • Both Upper & Lower Channels are lined with rubber to keep all types of plates/cassettes in a stable position.
  • Shipping weight: 7 lbs.




    • Stock #
    Your Price
    35
    $185.14






    Bar-Ray's Mobile Cassette Holder.
    Bar-Ray Products!
    This all metal Mobile Cassette Holder is used to hold cassettes/grids (8"x10" to 14"x17") during mobile procedures. Unit stands on a sturdy three leg base with swivel locking wheels. Finish is putty enamel. Measures 46" tall with a 16" height adjustment and weighs approximately 58 lbs. This unit features a L/R Tilt only. See 69294 for L/R & Up/Down tilt.

    Stock #
    Description
    Dimensions
    Grid Size
    Your Price
    62856
    Mobile Cassette Holder, L/R Tilt
    46" tall, 16" height adjustment
    8"x10" to 14"x17"
    $785.71
    69294
    Mobile Cassette Holder, with L/R & Up/Down tilt
    46" tall, 16" height adjustment
    8"x10" to 14"x17"
    $885.71